(You do not need to install this driver if you only plan to use the Black Magic Probe and do not need/want to upgrade the firmware.) Also, Windows 10 displays the BMP probe ports using the generic title, “USB Serial Device”, as seen below: This will give you access to the DFU interface of the Black Magic Probe and allow you to use dfu-util to upgrade the Black Magic Probe firmware. Note: If you are on Windows 10 and want to upgrade the firmware to the probe itself, you can install the libusbK driver. Note: For older Windows versions (Windows 7 and older), you will be prompted to install a driver. To find the allocated ports, check the Device Manager:
The first COM port is the GDB extended remote server and the second one is USB to Serial adapter on the back of the board. On Windows, when you first connect, the Black Magic Probe should be detected as two COM ports. The first interface provides the GDB server, and the second provides a USB to UART adapter. It is not a modem.Ĭdc_acm 1-1.1:1.2: ttyACM1: USB ACM device It is not a modem.Ĭdc_acm 1-1.1:1.0: ttyACM0: USB ACM deviceĬdc_acm 1-1.1:1.2: This device cannot do calls on its own. Usb 1-1.1: Manufacturer: Black Sphere TechnologiesĬdc_acm 1-1.1:1.0: This device cannot do calls on its own.
Usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Usb 1-1.1: New USB device found, idVendor=1d50, idProduct=6018 Usb 1-1.1: new full-speed USB device number 58 using ehci-pci
0 kommentar(er)
